Krone SDK 27 elBA-STLI semitrailer varebil

Description: Box semitrailer
Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
Please note: The images shown are archive images. The vehicle may be in use!
Registration/Operation: Maximum permissible saddle load: 12,000 kg
Technically permissible maximum saddle load: 12,000 kg
Technically permissible maximum axle load: 27,000 kg
Technically permissible maximum total weight: 39,000 kg
Front frame height: 100 mm (incl. floor and saddle plate)
Manufacturer of braking system: Wabco
Type: BO 13620 B
Body type: AB 13620 STLI
Exterior width: 2,600 mm. 2480 mm between the keyhole plates
Interior width: 2480 mm approx. 2,470 mm between the rub rails
Interior height: 2,715 mm
Loading height in the rear portal: 2650 mm
Side walls in sandwich construction with steel outer layer, panel thickness: 30 mm, painted on the outside, PVC-coated on the inside, side wall connection on the outside via aluminum profiles, on the inside with steel rub rail 4 x 500 mm, protruding slightly as keyhole plate protection (4 mm offset). Lashing points: 13 pairs embedded in the rub rail. Note: Additional holes for warm air ducting of the cargo space heater. (A cargo space heater (underfloor) incl. a diesel tank can be installed later. (Not included in Kone's scope of delivery!)
Front wall in insulated design, panel thickness: 30 mm (sandwich panels with foamed PU core and steel outer layer) Reinforcement of the front wall on the inside at the bottom like the rub rail (4 x 500 mm), above that a 21 mm thi
axle configuration: 3 axles
colour: silver
Registration/Operation: Maximum permissible axle load: 24,000 kg
Registration/Operation: Maximum permissible total weight: 36,000 kg
Chassis
Double-T longitudinal and center beams as well as outer frame with cross members and outriggers
welded together
Outrigger system
Two mechanical support winches
2 x 12 tons
semi-circular with base plate
F
Axles/Unit
3 axles
Electronically controlled air suspension
ECAS (Wabco)
ECAS can only be operated with an external voltage source
Control of the air suspension system via SmartBoard
6-ply
385/65 R22.5"
Rims center-mounted
Brake
Spring-loaded parking brake
2 chock blocks
WABCO SmartBoard
Displays the following information
Trailer operating data
EBS error messages
Kilometer information
Axle loads
ECAS control via SmartBoard
Lift axle control via SmartBoard
Lights
Lighting and signaling system according to EC directives 76/756/EEC and subsequent directives or UN ECE Regulation No. 48
2 outline lights with rubber arm
LED version
Side marker lights in LED version
Electrical connections approx. 350 mm above the beam height
24 Volt
front with 7-pin socket DIN ISO 1185
7-pin socket DIN ISO 3731 at the front
for additional functions
Additionally
a 15-pin socket DIN ISO 12098 at the front
Floor
30 mm thick
water-resistant laminated floor
cut edges sealed all around
strength according to DIN 283
for floor loads up to 7,000 kg forklift axle load
Box body
Bdobmcdozblv Se Eitsg
Unladen vehicle overall height at the highest point approx. 4,010 mm (with the aforementioned unladen saddle height)
Steel guide rails embedded on both sides for accommodating double-deck load beams (33 pallets in longitudinal direction)
22 + 1 LM load beams for double-deck loading
load-bearing capacity per load beam approx. 10 kN. Interior
keyhole plates fully flush on the surface between the double-deck guide rails. In the area 1,400 - 1,900 mm from the floor surface
there must be no keyhole plates
a smooth surface must be maintained